This directory contains source code for two new libraries that need to be added
to your GENESIS executable in order to use the network leech model.  These are
meant to be added to an already-compiled version of GENESIS, so you will _not_
need to recompile your GENESIS program; you'll just be creating a new GENESIS
program from your already-compiled version.

*  If you use a common machine, such as a Sun or a Linux machine, check to
   make sure we haven't placed a pre-compiled version on our ftp site.  It
   might save you some time to get a pre-compiled version.

To add the libraries, do the following:

1)  copy Makefile.usermake from the GENESIS/Scripts/newlib directory this
    directory and name it Makefile.

2)  Follow the directions in newly copied Makefile, such as setting the machine
    type, setting your compiler,  and giving the new executable a name.

3)  Also within Makefile, set the following:

     USERDIR	= newlib1 newlib2

     USEROBJ	= newlib1/newconnlib.o newlib2/leechlib.o

     USERLIB	= newconnlib leech

4)  Edit the line "GENESIS = /usr/local/genesis" in both Makefile and
    newlib1/Makefile so it points to your GENESIS installation directory.

5)  Make sure you have done a "make install" in the GENESIS/src directory.  (It
    is possible to use GENESIS without doing this, but this Makefile assumes
    that you have put a copy of each library in GENESIS/lib.)

6)  If you use any libraries that are not in the standard GENESIS distribution
    (such as spikelib; look for GENESIS/lib/spikelib to see if you have it), 
    add them to the "GENESIS" and "LIBLIST" variables in the Makefile.

7)  Type "make".

This directory contains an example Makefile file for Linux.  It includes the
spike library and uses GNU development tools.  (cc maps to gcc on our system.)

Questions?  Email andrew@biology.emory.edu or vanhoosr@biology.emory.edu.